Photoduino + Sensors + Mariotte Solenoid Siphon + Object Splash Device KIT – SET

 

Cheaper compared with ANY other solution with same or even less capabilities

Buy a complete set of all above devices and

SAVE A LOT OF MONEY!

 

 

Photoduino is an open source camera controller based on the Arduino platform which you can use to automatically take pictures with your DSLR camera.

Its main purpose is to serve as technical support for shooting high speed photos, but you can use as intervalometer to make  ”Timelapse” videos or for animals or insects photography. Check the example photos.

For any help and more detailed info about photoduino use this LINK. 

 

 

Photoduino assembled PCB Arduino digital camera shield 3.0 **** Complete **** Time Lapse, Arduino shield,trigger audio,vibration,laser, etc

PHOTODUINO PCB ASSEMBLED with Arduino UNO board and covers

Photoduino is an open source camera controller based on the Arduino platform which you can use to automatically take pictures with your DSLR camera.
Its main purpose is to serve as technical support for shooting high speed photos, but you can use as intervalometer to make  ”Timelapse” videos or for animals or insects photography. Check the example photos.It is an electronic circuit that is placed on an Arduino board as a “shield” taking all inputs, outputs and power pins. It has all the necessary electronic components and connectors for connecting the camera, flashes and sensors.
You can control the shutter and camera autofocus and also can triggering of two flashes. It also has a sound sensor, an shock/impact sensor and a laser or infrared barrier that can be used to take pictures when you register an event in the sensor. With the Solenoid Valve Interface you can generate droplets directly from Photoduino.
The configuration is done entirely through a small LCD screen using only two buttons, so it works independently without the need for a computer (except for firmware updates) but also, you can use the Photoduino Remote Software to wide control Photoduino from your computer.
Top and bottom cover is clear acrylic sheet, spacers are ABS 3D printed, which also protect acrylic at the corners.

NOTICE:

• I sell the main PCB (and solenoid valve circuit), assembled with Arduino UNO board.
• Sensors, not included.
• I use BT169D thyristors.
• USB cable not included.
• Arduino board USB connector is type “B”, but in case of no availability, can be “micro USB”.
• I suggest you to use an “external power bank battery charger” to power the device. It lasts for long time, it is rechargeable and cheap.

PCB design modified by me, to be able use more common components, like speaker and contrast trimmer.
Also, changed pcb traces to include the solenoid control board.
For any help to build it and for needed components, you can find instructions to this Link to build it.

• Ship to confirmed addresses
• First priority shipping next business day with tracking number (You can check shipping date from purchase history).
• Shipping and handling charges covers the real cost for first priority registered post
• Normally delivered within 3-7 business days after shipping
• I suggest you to use 17track to track your order. If its necessary, choose your destination country.
• Before you sign  to receive your order, check the package for damage. For more info, click this Ebay LINK.
• Notice: Delivery to some countries/areas may experience some delay. I am not responsible for that. I ship fast.

Please remember to leave feedback when you receive and test interface. I ask you to give me positive feedback. For any problem, question, help or if you are not satisfied, contact me (taloseshop[at]gmail.com). I will be glad help to resolve any problem.

Κράτα το

Κράτα το

Alinco DX-77 Digi Interface with PTT – PSK,PSK31,RTTY,SSTV

ALINCO USB Digital Interface with PTT control
PSK31, PSK, RTTY, SSTV, NBEMS, JT-65, WeatherFax, Echolink and other digimodes
HF/VHF/UHF

Compatible with ALINCO DX-77 and variations of this model (transceiver not included) and all other radios with same 8 pin ROUND connector and pin assignment as shown to the picture gallery. NOTICE: Check your manual to be sure that MIC connector supports to pin 6 AF (Audio) output. This interface allows your PC or Laptop, to decode/encode digital signals using free (or paid) software.

3 in 1 – BEST VALUE FOR MONEY
USB audio interface + Digital Interface + PTT control
*** sold tens of them ***

• No need to use your PC, Laptop or Netbook soundcard 
• No need to use internal or USB serial port.
• No need to plug and unplug your mic & speakers. Just connect it to a free USB port
• No need for drivers
• PnP with Windows XP, Vista, 7, 8 and all OS that support generic audio interface
• Supports FLDIGI, MMSSTV, DIGIPAN, MultiPSK and any other program that can send PTT tone to right audio channel or play the digital signal to both audio channels
  
• You can download software clicking HERE

Why pay more for less? Pay less for more!

HOW TO:

• Connect USB Interface to a free USB port (OS will detect it and install drivers)
• Open your application and configure it to use the proper audio device and select audio mono output or PTT tone to right audio channel. If you can’t find such options, probably application sends signal to both audio channels.
• Tune your radio to a digi mode frequency
• Open USB Audio properties, adjust audio output and MIC level tho the highest level. If it is necessary, disable Mic AGC.
• Plug 6 pin mini-din to Kenwood Data port
• Tune your radio to a digimode frequency.
• Use green potentiometer to adjust audio until you have the proper receiving (RX) level.
• Use red potentiometer to adjust transmitting (TX) level (check ALC level). When transmits, red led turns on.

 

Interface is assembled and tested.
Total interface length with cable is ~1m. Cable, box or jack color could vary.
USB cable not included.
Dimensions: 6.5×8.7×2.6cm (2.56×3.42x1.02in)
Notice: Box is custom designed and build with 3D printer. Good quality but not perfect like molded boxes. Please see gallery photos at the top for more detailed view.
Before you order, please read carefully the item’s description. Check your radio manual to confirm that is compatible and how to set the correct settings.

• Ship to confirmed addresses.
• First priority shipping next business day with tracking number (You can check shipping date from purchase history).
• Shipping and handling charges covers the real cost for first priority registered post. Shipping with a courier, will be extremely expensive.
• Normally delivered within 5-15 business days after shipping. If you want it very fast, I can not guarantee it, but it will not be unusual, if you receive it in less than 5 days.
• Notice: Delivery to some countries/areas may experience some delay. I am not responsible for that. I ship fast. Also, some countries does not update tracking history, until they deliver the packet.
• I suggest you to use 17track to track your order. If its necessary, choose your destination country.

Please remember to leave feedback when you receive and test interface. I ask you to give me positive feedback. For any problem, question, help or if you are not satisfied, contact me (taloseshop[at]gmail.com). I will be glad help to resolve any problem.

Check out my other items. Add me to your favorites list.

PHOTODUINO PCB ASSEMBLED

Photoduino is an open source camera controller based on the Arduino platform which you can use to automatically take pictures with your DSLR camera.
Its main purpose is to serve as technical support for shooting high speed photos, but you can use as intervalometer to make  ”Timelapse” videos or for animals or insects photography. Check the example photos.It is an electronic circuit that is placed on an Arduino board as a “shield” taking all inputs, outputs and power pins. It has all the necessary electronic components and connectors for connecting the camera, flashes and sensors.
You can control the shutter and camera autofocus and also can triggering of two flashes. It also has a sound sensor, an shock/impact sensor and a laser or infrared barrier that can be used to take pictures when you register an event in the sensor. With the Solenoid Valve Interface you can generate droplets directly from Photoduino.
The configuration is done entirely through a small LCD screen using only two buttons, so it works independently without the need for a computer (except for firmware updates) but also, you can use the Photoduino Remote Software to wide control Photoduino from your computer.
NOTICE: I sell the main PCB (and solenoid valve PCB circuit) assembled. Arduino module and sensors, not included. I use BT169D thyristors.
PCB design modified by me, to be able use more common components, like speaker and contrast trimmer.
Also, changed pcb traces to include the solenoid control board.
For any help to build it and for needed components, you can find instructions to this Link to build it.

• Ship to confirmed addresses
• First priority shipping next business day with tracking number (You can check shipping date from purchase history).
• Shipping and handling charges covers the real cost for first priority registered post
• Normally delivered within 3-7 business days after shipping
• I suggest you to use 17track to track your order. If its necessary, choose your destination country.
• Before you sign  to receive your order, check the package for damage. For more info, click this Ebay LINK.
• Notice: Delivery to some countries/areas may experience some delay. I am not responsible for that. I ship fast.

Please remember to leave feedback when you receive and test interface. I ask you to give me positive feedback. For any problem, question, help or if you are not satisfied, contact me (taloseshop[at]gmail.com). I will be glad help to resolve any problem.

Κράτα το

Photoduino and Solenoid PCB – Arduino shield trigger audio, vibration, light, laser, etc

 Photoduino and Solenoid PCB

Photoduino is the open source camera controller based on the Arduino platform which you can use to automatically take pictures with your DSLR camera.
Its main purpose is to serve as technical support for shooting high speed photos, but you can use as intervalometer to make  ”Timelapse” videos or for animals or insects photography. Check the example photos.

It is an electronic circuit that is placed on an Arduino board as a “shield” taking all inputs, outputs and power pins. It has all the necessary electronic components and connectors for connecting the camera, flashes and sensors.
You can control the shutter and camera autofocus and also can triggering of two flashes. It also has a sound sensor, an shock/impact sensor and a laser or infrared barrier that can be used to take pictures when you register an event in the sensor.With the Solenoid Valve Interface you can generate droplets directly from Photoduino.
The configuration is done entirely through a small LCD screen using only two buttons, so it works independently without the need for a computer (except for firmware updates) but also, you can use the Photoduino Remote Software to wide control of Photoduino.

PCB design modified by me, to be able use more common components, like speaker and Contrast trimmer.
Also, changed pcb traces to include the solenoid control board, which you can cut it (very carefully not damage to the main pcb traces. If you want, ask me to cut it).
For any help to build it and for needed components, you can find instructions to this Link to build it. I sell only the PCB, not the completed device.

• Ship to confirmed addresses
• First priority shipping next business day with tracking number (You can check shipping date from purchase history).
• Shipping and handling charges covers the real cost for first priority registered post
• Normally delivered within 3-7 business days after shipping
• I suggest you to use 17track to track your order. If its necessary, choose your destination country.
• Notice: Delivery to some countries/areas may experience some delay. I am not responsible for that. I ship fast.

Please remember to leave feedback when you receive and test interface. I ask you to give me positive feedback. For any problem, question, help or if you are not satisfied, contact me (taloseshop[at]gmail.com). I will be glad help to resolve any problem.

Κράτα το

Kenwood Echolink USB Interface Audio Data Cable PG-5A, PG-5H / TM-D710, TM-V71

 

Echolink-IRLP USB Interface Audio Data Cable PG-5A
for Kenwood TM-D710, TM-V71

Works with TM-D710, TM-D710A, TM-D710E, TM-V71, TM-V71A, TM-V71E, RC-D710 which use mini din 6 input/output data port.  Echolink sysop mode (node station) operation. Notice: This cable is for users who already have a PG-5G Serial Communication Cable. If you do not have one (PG-5G), you can purchase it HERE. Or purchase a PG-5H cable set (PG-5A & PG-5G) and save money, HERE.

 2 in 1 – Best value for money
USB audio + Echolink-IRLP cable PG-5A equivalent
*** sold tens of them ***

• No need to use your PC, Laptop or Netbook soundcard
• No need to plug and unplug your speakers. Just connect it to a free USB port
• No need for drivers
• PnP with Windows XP, Vista, 7, 8 and all OS that support generic audio interface

Why pay more for less? Pay less for more!

HOW TO:

• Connect USB Interface to a free USB port (OS will detect it and install drivers)
• Plug 6 pin mini-din to Kenwood Data port
• Open your Echolink application and configure it to use the proper audio device

Interface is assembled and tested. Cable Length is ~1.5m  (59 inches) . USB audio, cable or jack color could vary. Check your radio manual to confirm that is compatible and how to set the correct settings.

• Ship to confirmed addresses
• First priority shipping next business day with tracking number (You can check shipping date from purchase history).
• Shipping and handling charges covers the real cost for first priority registered post
• Normally delivered within 3-7 business days after shipping
• I suggest you to use 17track to track your order. If its necessary, choose your destination country.
• Notice: Delivery to some countries/areas may experience some delay. I am not responsible for that. I ship fast.

Please remember to leave feedback when you receive and test interface. I ask you to give me positive feedback. For any problem, question, help or if you are not satisfied, contact me (taloseshop[at]gmail.com). I will be glad help to reolve any problem.

 

Check out my other items. Add me to your favorites list.

Κράτα το

Yaesu CAT programming cable CT-62 – FT-100, FT-817, FT-857, FT-897 – USB to TTL

 
USB to TTL, CAT programming cable CT-62
Yaesu FT100, FT-817, FT-857, FT-897

Yaesu CT-62 equivalent programming cable. Works with Yaesu FT-100, FT-100D, FT-817, 817ND, 857, 857D, 897, 897D and all other radios that they use CT-62 Yaesu programming cable. This interface allows your PC, Laptop, tablet to communicate with your transceiver.

• Cable offers full CAT Control of your Yaesu Transceiver
• Fully compatible with all popular CAT / logging software
• Supports FlDigi, Ham Radio Deluxe (HRD), FTBCat, MixW, WINLog32, Turbolog, and any other application that can use CAT port to control transmit
• Perfect for PSK, PSK31, QPSK, SSTV, RTTY, DominoEX and any FSK-AFSK digital mode
• Use it to view, edit or back up memory data from your radio using software like CHIRP
• PL2303HX USB to TTL level chip
• Works at all supported radio baud rates
• Compatible with Windows 2000, XP, Vista, 7, Linux, Mac OS, Android.
• To check the compatibility with your operating system, look HERE
• You can download Windows installation instructions clicking HERE 
• Download drivers clicking HERE

HOW TO:

• Before you start installation, read instructions.
• Download and install drivers
• Connect USB Interface to a free USB port
• Plug 8 pin mini-din to Yaesu Data port
• Open your application and configure it to use the proper audio device
• Tune your radio to a digimode frequency
• Enable VOX operation to your radio and check VOX Level
• Open USB Audio properties, adjust audio output level and MIC level. If it is necessary, disable Mic AGC

Interface is assembled and tested. Cable Length is ~1m. USB interface, cable or jack color could vary. Before you order, please read carefully the item’s description. Check your radio manual to confirm that is compatible and how to set the correct settings.

• Ship to confirmed addresses
• First priority shipping next business day with tracking number 
• You can check shipping date and tracking number from purchase history)
• Shipping and handling charges covers the real cost for first priority registered post
• Normally delivered within 3-7 business days after shipping

Notice: Delivery to some countries/areas may experience some delay. I am not responsible for that. I ship fast.

Please remember to leave feedback when you receive and test interface. For any problem or question, contact me. I will be glad to help you.

Check out my other items. Add me to your favorites list.

ICOM Digi Interface with PTT – PSK,PSK31,RTTY,SSTV / ICOM IC-275A, IC-575A/H, IC-707, IC-725/726, IC-728/729, IC-735/736/737/738, IC-7400, IC-746, IC-746PRO (no VHF support), IC-756/756PRO, IC-756PROII/III, IC-761/765, IC-775/775DSP, IC-781, IC-820H/821H, IC-910H, IC-970, IC-M600, IC-M700PRO, IC-M710, IC-M802, IC-7600/7700/7800

 

ICOM USB Digital Interface with PTT control
PSK31, PSK, RTTY, SSTV, NBEMS, JT-65, WeatherFax, Echolink and other digimodes
HF/VHF/UHF(Hardware version 5)

Compatible with ICOM IC-275A, IC-575A/H, IC-707, IC-725/726, IC-728/729, IC-735/736/737/738, IC-7400, IC-746, IC-746PRO (no VHF support), IC-756/756PRO, IC-756PROII/III, IC-761/765, IC-775/775DSP, IC-781, IC-820H/821H, IC-910H, IC-970, IC-M600, IC-M700PRO, IC-M710, IC-M802, IC-7600/7700/7800, (transceivers not included) with 8 pin input/output data port. This interface allows your PC or Laptop, to decode/encode digital signals using free (or paid) software.

3 in 1 – BEST VALUE FOR MONEY
USB audio interface + Digital Interface + PTT control
*** sold tens of them ***

• No need to use your PC, Laptop or Netbook soundcard 

• No need to use internal or USB serial port.

• No need to plug and unplug your mic & speakers. Just connect it to a free USB port

• No need for drivers

• PnP with Windows XP, Vista, 7, 8 and all OS that support generic audio interface

• Supports FLDIGI, MMSSTV, DIGIPAN, MultiPSK and any other program that can send PTT tone to right audio channel or play the digital signal to both audio channels
  

• You can download software clicking HERE

Why pay more for less? Pay less for more!

HOW TO:

• Connect USB Interface to a free USB port (OS will detect it and install drivers)

• Open your application and configure it to use the proper audio device and select audio mono output or PTT tone to right audio channel. If you can’t find such options, probably application sends signal to both audio channels.

• Tune your radio to a digi mode frequency.

• Set mode to USB/LSB or USB/LSB Data.

• Open USB Audio properties, adjust audio output and MIC level tho the highest level. If it is necessary, disable Mic AGC.

• Plug 8 pin din connector to Icom ACC port.

• Tune your radio to a digimode frequency.

• Use green potentiometer to adjust audio until you have the proper receiving (RX) level.

• Use red potentiometer to adjust transmitting (TX) level. When transmits, red led turns on.

 Interface is assembled and tested.
Total interface length with cable is ~1m. Cable, box or jack color could vary.
USB cable not included.
Dimensions: 6.5×8.7×2.6cm (2.56×3.42x1.02in)
Notice: Box is custom designed and build with 3D printer. Good quality but not perfect like molded boxes. Please see gallery photos at the top for more detailed view.
Before you order, please read carefully the item’s description. Check your radio manual to confirm that is compatible and how to set the correct settings.

• Ship to confirmed addresses
• First priority shipping next business day with tracking number (You can check shipping date from purchase history).
• Shipping and handling charges covers the real cost for first priority registered post
• Normally delivered within 3-7 business days after shipping
• I suggest you to use 17track to track your order. If its necessary, choose your destination country.

• Notice: Delivery to some countries/areas may experience some delay. I am not responsible for that. I ship fast.
  

Please remember to leave feedback when you receive and test interface. I ask you to give me positive feedback. For any problem, question, help or if you are not satisfied, contact me (taloseshop[at]gmail.com). I will be glad help to resolve any problem.

Check out my other items. Add me to your favorites list.

Κράτα το

Yaesu Iphone/Android PTT Interface-PSK,PSK31,RTTY,SSTV / FT-100,817,857,897

 
YAESU
Digital Iphone/IPad – Android RX/TX Interface with PTT control
PSK31, PSK, RTTY, SSTV, NBEMS, JT-65, WeatherFax and other digimodes

Mini din 6 pins connector

HF/VHF/UHF

Compatible with Yaesu FT-100, FT-817, FT-857, FT-897, FT-450, FT-950, FT-991, FT-1500, FT-3000, FT-7100, FT-7800, FT-7900, FT-8000, FT-8100, FT-8500, FT-8800, FT-8900, FT-DX1200, FT-DX3000 and variations of these models (transceivers not included) and all other radios with mini din 6 pins input/output data port.

This interface allows your IPhone, IPad, IPod & Android devices (phone or tablet) to decode/encode Digital mode signals using free (or paid) software.

TRRS Jack

Notice: Interface to be compatible with a phone/tablet device, must use a TRRS jack with outputs as shown at the picture. Also, all phone or table headsets to be recognized from the device must have a resistance between Common and Mic Input. The connected resistor to the interface is 1.8K and tested with android/apple phones and tablets. Also can work with windows devices that use same jack.

Interface can recognized from almost any device. To be sure, use an Iphone (4, 5, etc) headset connected to your phone/tablet. If you can talk and listen, then probably you will not have any problem.
For better tune, two potentiometers allows you to adjust in and out audio level.

• Compatible with IPhone, Ipad, Ipod, Android phones or tablets
• Use it with you base or mobile radio
• Tested with many different brands and models without a problem.
• Supports any digi program written for Apple iOS and Android phones or tablets.

HOW TO:

• Plug the 6 pin mini din connector to your radio.
• Connect audio jack to the headphone/Mic jack of your phone or tablet.
• Turn on interface (black switch at the left side). A green led opens at the front.
• Tune your radio to a digital mode frequency.
• Lower the transceiver’s volume to be sure that phone/tablet does not receive sound from the internal microphone.
  

  Front side

• Check if phone volume is full open.
• Use green potentiometer to adjust audio until you have the proper receiving (RX) level.
• Tune your radio to a digimode frequency.
• Use red potentiometer to adjust transmitting (TX) level (check ALC level). When transmits, red led turns on.

Interface is assembled and tested.
Total interface length with cables is ~1.5m. Cable, box or jack color could var.
9V battery not included.
When is in receive mode, consumption is 6mAh and 11mAh when PTT
Dimensions: 6.2×10.5x25mm (2.44×1.13x0.98in)
Notice: Box is custom designed and build with 3D printer. Good quality but not perfect like molded boxes. Please see gallery photos at the top for more detailed view.

Before you order, please read carefully the item’s description. Check your radio manual to confirm that is compatible and how to set the correct settings.

• Ship to confirmed addresses
• First priority shipping next business day with tracking number (You can check shipping date from purchase history).
• Shipping and handling charges covers the real cost for first priority registered post
• Normally delivered within 3-7 business days after shipping
• I suggest you to use 17track to track your order. If its necessary, choose your destination country.
• Notice: Delivery to some countries/areas may experience some delay. I am not responsible for that. I ship fast.

Please remember to leave feedback when you receive and test interface. I ask you to give me positive feedback.
For any problem, question, help or if you are not satisfied, contact me (taloseshop[at]gmail.com). I will be glad help to resolve any problem.

Check out my other items. Add me to your favorites list.

Kenwood Iphone/Android PTT Interface-PSK,PSK31,RTTY,SSTV – TM-251/255, TM-451/455, TM-D700/A, TM-D710/A/E, TM-G707, TM-V708, TM-733A, TM-V7/V7A/V71A, TS-480HX/SAT & TM-271/A (European models only)

 
KENWOOD
Digital Iphone/IPad – Android RX/TX Interface with PTT control
PSK31, PSK, RTTY, SSTV, NBEMS, JT-65, WeatherFax and other digimodes

Mini din 6 pins connector

HF/VHF/UHF

Compatible with KENWOOD TM-251/255, TM-451/455, TM-D700/A, TM-D710/A/E, TM-G707, TM-V708, TM-733A, TM-V7/V7A/V71A, TS-480HX/SAT & TM-271/A (European models only) and variations of these models (transceivers not included) and all other radios with mini din 6 pins input/output data port. This interface allows your PC or Laptop, to decode/encode digital signals using free (or paid) software.

This interface allows your IPhone, IPad, IPod & Android devices (phone or tablet) to decode/encode Digital mode signals using free (or paid) software.

TRRS Jack

Notice: Interface to be compatible with a phone/tablet device, must use a TRRS jack with outputs as shown at the picture. Also, all phone or table headsets to be recognized from the device must have a resistance between Common and Mic Input. The connected resistor to the interface is 1.8K and tested with android/apple phones and tablets. Also can work with windows devices that use same jack.
Interface can recognized from almost any device. To be sure, use an Iphone (4, 5, etc) headset connected to your phone/tablet. If you can talk and listen, then probably you will not have any problem.
For better tune, two potentiometers allows you to adjust in and out audio level.

• Compatible with IPhone, Ipad, Ipod, Android phones or tablets
• Use it with you base or mobile radio
• Tested with many different brands and models without a problem.
• Supports any digi program written for Apple iOS and Android phones or tablets.

HOW TO:

• Plug the 6 pin mini din connector to your radio.
• Connect audio jack to the headphone/Mic jack of your phone or tablet.
• Turn on interface (black switch at the left side). A green led opens at the front.
• Tune your radio to a digital mode frequency.
• Lower the transceiver’s volume to be sure that phone/tablet does not receive sound from the internal microphone.
  

  Front side

• Check if phone volume is full open.
• Use green potentiometer to adjust audio until you have the proper receiving (RX) level.
• Tune your radio to a digimode frequency.
• Use red potentiometer to adjust transmitting (TX) level (check ALC level). When transmits, red led turns on.

Interface is assembled and tested.
Total interface length with cables is ~1.5m. Cable, box or jack color could var.
9V battery not included.
When is in receive mode, consumption is 6mAh and 11mAh when PTT
Dimensions: 6.2×10.5x25mm (2.44×1.13x0.98in)
Notice: Box is custom designed and build with 3D printer. Good quality but not perfect like molded boxes. Please see gallery photos at the top for more detailed view.
Before you order, please read carefully the item’s description. Check your radio manual to confirm that is compatible and how to set the correct settings.

• Ship to confirmed addresses
• First priority shipping next business day with tracking number (You can check shipping date from purchase history).
• Shipping and handling charges covers the real cost for first priority registered post
• Normally delivered within 3-7 business days after shipping
• I suggest you to use 17track to track your order. If its necessary, choose your destination country.
• Notice: Delivery to some countries/areas may experience some delay. I am not responsible for that. I ship fast.

Please remember to leave feedback when you receive and test interface. I ask you to give me positive feedback.
For any problem, question, help or if you are not satisfied, contact me (taloseshop[at]gmail.com). I will be glad help to resolve any problem.

Check out my other items. Add me to your favorites list.